Fit Child Restraints Correctly

n036 easy steps for having safe and correctly-fitted child restraints

Step 1 – Check that you have fitted the restraint according to the manufacturer’s directions and make sure it is in good condition;

Step 2 – Check the upper anchorage strap is firmly adjusted to remove slack but not over-tightened to cause the restraint base to lift off the vehicle seat;

Step 3 - Check the vehicle’s seat belt is fed through the correct pathway for the particular child restraint and according to the manufacturer’s instructions;

Step 4 - Make sure the restraint is suitable for the child’s weight;

Step 5 – Check the shoulder harness can be adjusted on to the child firmly enough to remove all slack and the harness slot is no lower than shoulder height;

and

Step 6 – Make sure the restraint is suitable for your vehicle.